Optical Fiber Proof-Testing Machine – Why Is This Critical..

Fiber proof testers are designed to apply a set load to FTTH Cable Production Line in order to test the effectiveness of the spliced Fiber. Our Fiber proof testers can be purchased in both linear and rotary styles, for both proof and stress testing. Fiber proof testers are accessible for single mode, multimode, and polarization-sustaining fibers. Choose from devoted, stand alone techniques or multipurpose styles which can be also able to stripping, cleaning, cleaving, splicing, and/or recoating.

Fiber Recoaters with Proof Testers offer easy, incorporated solutions to recoat and test combination-spliced materials. The Fiber recoating procedure restores the barrier coating to your removed Fiber, providing much more versatility when compared to a warmth-shrink safety sleeve, enabling so that it is dealt with and coiled with no damage to the fusion-spliced section. The integrated linear or rotary Proof tester allows users to instantly test a recoated Fiber having a pre-determined load and figure out the long-term longevity of the Fiber. Due to their ability to restore a fusion-spliced Fiber to near original condition, these techniques are best for programs like undersea visual Fiber wires, submarine communication wiring, Fiber lasers, or Dispersed Bragg Reflector (DBR) lasers.

This process begins with the combination-spliced section of Fiber being placed in the center of the mold assembly (see image for the right). Once set constantly in place, inserts within the Fiber obstructs safe the spliced Fiber in position. Recoat materials is pumped to the cavity and then UV-treated. The recoated Fiber can then be analyzed by pulling onto it as much as a pre-decided load.

Recoater and Mold Assembly Options – Recoaters can be purchased with either an automated or handbook mold set up. The automated mold assembly features pneumatic charge of the mold plates and is also enhanced for high-volume manufacturing applications. Manual mold assemblies, on the other hand, use hinged mold plates which provide more versatility and are best for reduced-volume manufacturing or RAndD programs. A computerized or manual volumetric dispensing water pump and injection product is employed to inject the recoat material into the mold cavity.

The Sheathing Line comes standard using a mold set up for Ø430 µm coated materials; For your handbook recoaters (Product #s PTR206, PTR206B, PTR307, and PTR307B), the mold assembly is sold individually so that customers can pick the right mold coating diameter for application. Custom mold coating sizes are available approximately Ø900 µm. Pre-installation of the mold assembly in the factory is also available. Get in touch with Tech Assistance to learn more about custom molds or manufacturer assembly.

We provide you with each higher-index (Item # AB950200) and reduced-directory (Item # PC373) recoat materials to use in these recoaters. Recoaters with manual injection pumping systems (Item #s PTR206B and PTR307B) are compatible with both kinds of recoat material; all other recoaters are appropriate for the top-directory materials only. Our handbook recoaters with an automated injection program (Product #s PTR206 and PTR307) can be customized to work with both low- and-directory recoat materials; make sure you contact Technology Support for more information.

Proof Tester Choices – The PTR206, PTR206B, and PTR208 Fiber Recoaters include a built-in linear Proof tester, that takes the Fiber up to and including predetermined weight (20 N) then releases it. The linear Proof tester utilizes the identical Fiber holding blocks because the recoater and so the Fiber fails to have to be relocated just before testing. The PTR307 and PTR307B Fiber Recoaters have an incorporated rotary Proof tester, which can perform both Proof and stress tests (?89 N). A single set of Proof check grips is provided; replacement Proof check grips can be purchased listed below in packs of 10. Each screening process is completely programmable through the provided handset or tablet controller, enabling qyjflh consumer to select parameters such as the load, the rate at which the stress is applied, as well as the hold time.

Inserts for Fiber Keeping Obstructs – Along with the previously mentioned, we provide a number of inserts to use within the Fiber holding obstructs from the recoaters in order to back up a broad range of Optical Fiber Proof-Testing Machine covering diameters. For recoaters with a rotary Proof tester, the inserts are appropriate for Fiber covering diameters in a range from 125 µm to 900 µm. For recoaters using a linear Proof tester, the inserts include a range for Fiber coatings from Ø250 µm to Ø900 µm.

Leave a Reply

Your email address will not be published. Required fields are marked *